Adhesive mount application

The adhesive mount works best on clean surfaces. It will stick to metal,plastic, and painted surfaces. Please follow these steps for proper adhesive mount application.

Step 1

Clean the surface with soap and water. Wait for it to completely dry.

Step 2

Take one side of the adhesive pad protection off and place on surface. Thoroughly and firmly press down and rub all areas of the pad for 60 seconds.Make sure it has adhered to all areas of the surface.

Step 3

Wait 24 hours. 

 

Step 4 

Peel off the other side of the adhesive pad and mount the bracket and SmartiPi onto the pad. Do not put extra LEGO pieces or weight other than the camera on the SmartiPi. Extra weight will cause the case to fall.