This is CAD file download only. This STEP file can be used for 3D printing a bottom enclosure that fits on the bottom of the SmartiPi Touch 2 base. The base will require 30mm M3 screws and M3 nuts to attach it to the SmartiPi Touch 2 base. The nuts are the same exact size as the hexagon openings on the bottom of the enclosure. So hopefully you can just press them in. Nylon screws and nuts are available for purchase. The enclosure can be shortened by slicing the top off if desired. The nylon screws can then be cut.
You do not need the SmartiPi Touch 2 stand if you already have a SmartiPi Touch 2. It is the same geometry. The stand is only necessary if using a SmartiPi Touch 1.