SmartiPi Touch Pro 3
The SmartiPi Touch Pro 3 is a case for the Raspberry Pi Touch Display 2 and Raspberry Pi 3,4, and 5. A large or small back cover creates an internal large cavity for your own HAT boards or other custom components. There is even a space for the Raspberry Pi camera on the bottom of the display. If you are using a Raspberry Pi 5 with Pi OS, a switch on the side can be used to turn and off the Raspberry Pi. Once assembled, the USB and ethernet ports are accessible on the side of the case and the HDMI and audio ports are accessible on the back of the case. A fan is not included but is an optional accessory.
Raspberry Pi and Raspberry Pi Touch Display 2 are not included.
Also sold at
SOS Solutions (NL)
Raspberrystore.nl (NL)
Pi Hut (UK)
Cytron.io (MY)
Pishop.us (US)
Core Electronics (AU)
Separate USB-C power supply required. Official Raspberry Pi 27W USB-C power supply recommended if using Raspberry Pi 5. Official Raspberry Pi 15W USB-C power supply recommended if using Raspberry Pi 4.
Complete list of features
- Two back cover sizes available
- Cooling fan is not included but is an optional accessory
- The Raspberry Pi Touch Display 2 is powered by the Raspberry Pi GPIO ( extended GPIO pins are required if using a HAT ) Optional accessory available to power the display via a USB-C splitter cable.
- The power, HDMI, and audio jack on the Raspberry Pi are accessible on the back of the case
- A removable panel near the Raspberry Pi ports allows the flexibility of accessing HAT boards and connectors
- A included micro SD extender allows access to the micro SD card at the top of the case
- 75mm VESA mount points on the back of the case
- Weighted base
- Punch out USB/Ethernet covers for Raspberry Pi 3,4, and 5
- Mounting point for Raspberry Pi camera V2 and V3 ( wide angle and standard lens)
- Back panel on the back cover can be cut out with a utility knife ( allows for customization if desired)
- Front adhesive label to cover the camera hole ( customized graphics for 100+ pieces)
- Tilting display
- Side button to actuate the on/off microswitch on Raspberry Pi 5
- Secondary set of interior mounting points for a development board, HAT, or alternative Raspberry Pi position